3S 11.1V 25A w/Balance BMS Protection PCB Board
Package Included: 1 x Battery Protection Board Matters need attention: 1. Strictly connect according to wiring diagram : 0V(B-), 3.7V(B1),
3S 40A 18650 Li-Ion Lithium Battery Charger Protection Board Pcb Bms 12.6V
BMS voltage cut of 10.1 v
Charging is 12.6 to 18v is ok
NOTE:01
1) This board is not suit high power electronic tools, if use for screwdriver and drill,electric bike series make,fishing machine , please don't buy this.
Pcb Bms For Drill Motor 11.1V 12.6V Lipo Cell Module
BMS activate method : Use 12.6V Li-ion charger to charge it
Scope: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, polymer lithium battery)
Product Size: 42 * 60 * 3.4mm (balanced version)
Product weight: 9.8g (balanced version)
Charging voltage: 12.6V - 13.6V
Continuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current use)
Continuous charge current (upper limit): 20A
Balance version: suitable for starting current below 80A, power 135W below the drill.
Note 02
: try not to put a good battery and poor battery mixed together!
Note 03
When the load of the brush motor is used, try to connect a non-polar capacitor (withstand voltage above 25V, capacity 10uF-100uF) to the motor's positive and negative terminals to prevent the reverse spike from the motor. Break the MOS tube.
Battery Charger XTAR DRAGON VP4 PLUS Smart Set Pouch Probe Adapter Car Charger
DRAGON VP4 Plus
XTAR DRAGON VP4 Plus, your personal battery doctor!
• Test battery internal resistance and voltage
• Test battery real capacity
• Charge all popular Li-ion/Ni-MH batteries and 11.1V battery packs
• Optional 0.5A/1.0A/2.0A charge currents
• REFRESH Mode to eliminate memory effects
• USB output function
• Informative big LCD screen display
• Record function
DC 300W 20A CC CV Constant Current Adjustable Step Down Converter Voltage Buck Current Source Module
Specifications:
Input Voltage: 6V to 40V DC(10V to 40V is suggested)
Output Voltage: 1.2V to 36V DC
Output Current: 20A(max.), 15A(suggested)
Efficiency: 95%(24V to 12V, 20A)
Output Ripple: ≤50mV
Wiring Method: Terminal
Short Circuit Protection: Self-recovery(cannot short circuit for long time)
Size: 60 x 53 x 27mm / 2.36 x 2.08 x 1.06"
VO+: Output positive
VO-: Output negative
+IN: Input positive
-IN: Input negative
CV: Output voltage adjustment
CC: Output current adjustment
EN: Enable, low voltage level shut off output; suspension, high voltage level is effective
When input and output is common grounded, no-load CV output constant voltage,CC output constant current
DDR3 1333 pc3 10600 2Gb Ram Kingston
used 2200LKR 1 month warranty Kingston 2Gb ram
DDR3 1333 pc3 10600 4Gb Ram Kingston
used 4000LKR 1 month warranty Kingston 4Gb ram
Eneloop Pro AA High Capacity Ni-MH 2550mAh (Min. 2450mAh) Pre-Charged Rechargeable Battery
This product is Brand New and super fresh Use in many electronic home devices This product is Manufactured in Japan
High Power Led light Rechargeable Torch Light
Ultra fire High Power Led light Rechargeable Torch Light 6 month warranty Repairable Car Charging Vehicle Adapter + 230AC charger
JK-BD6A20S10P
Main technical parameters: JK-BD6A20S10P Working voltage: 20~100V Main Specifications Li-ion 7S~20S Lifepo4 8S-20S LTO 12S~20S Balance way Active Balance Active
Kingston DDR2-667 SDRAM KVR667D2S5/1G
DESCRIPTION
This document describes ValueRAM’s 128M x 64-bit 1GB
(1024MB) CL5 DDR2-667 SDRAM (Synchronous DRAM)
memory module. The components on this module include
eight 128M x 8-bit DDR2-667 SDRAM in FBGA packages.
This 200-pin SODIMM uses gold contact fingers and requires
+1.8V.
Mini DC-DC 4.5V-35V 5A 90W PWM DC Motor Speed Controller Module Speed Regulator Control Adjust Adjustable Board Switch 12V 24V
Specification:
Working voltage: DC4.5V-35V
Output current: 0.5A
Output power: 90W (maximum)
PWM frequency: 20KHz
Product size: 30mmx26mmx14mm/1.18x1.02x0.55''
Product weight: 14g
Warm Tips:
1. DC positive and negative terminals do not reverse, otherwise the governor may be damaged.
2. The motor can be divided into positive and negative directions. When the direction of operation is not consistent with the expectation, the direction can be changed by adjusting the line order.
3. Adjusting the potential meter knob can change the duty cycle of the governor and change the speed of the motor.
Package Included:
1 x Mini 5A 90W PWM 4.5-35V DC-DC Motor Speed Controller Module Regulator Adjustable
Original Brand Earbuds Headphone Noise Isolating in ear Earphone Headset with Mic for Mobile phone Universal for MP4
Highly supported for oppo all brands vivo Xiaomi Sony Samsung Apple
3.5mm Earphone Headphone
Quality: AAAAA
Color: Black
Cable: about 1M
Volume control With Mic