Electronics
Savandara සැවැන්දරා Khas
Beheth Ederu
Heen Araththa (හීන් අරත්ත) / Katukiriya(කටුකීරිය) Alpinia calcarata100g
Wooden single drawer
Decoration wooden present
Eames plastic side chair
Panton tunior chair
Augue adipiscing euismod
Aloe Vera Leaf packet 100g
Classic wooden chair
iPhone dock
Eames lounge chair
TONGOU TO-Q-SMR1S-40JZTA RCBO
| 1.Certifications | CE |
| 2. ZigBee | ZigBee 3.0 |
| 3. Type | Type A |
| 4. Leakage Setting | 30mA Fixed |
| 5. Current Setting | 1-20A |
| 6. Over Voltage Setting | 245V–295V |
| 7. Under Voltage Setting | 145V–220V |
| 8. Temperature Setting | -25°C to 100°C |
| 9. Over Power Setting | 5W–25,000W |
| 10. Reclosing Function | Yes |
Mini DC-DC 4.5V-35V 5A 90W PWM DC Motor Speed Controller Module Speed Regulator Control Adjust Adjustable Board Switch 12V 24V
1 x Mini 5A 90W PWM 4.5-35V DC-DC Motor Speed Controller Module Regulator Adjustable
3S 11.1V 25A w/Balance BMS Protection PCB Board
3S 40A 18650 Li-Ion Lithium Battery Charger Protection Board Pcb Bms 12.6V
BMS voltage cut of 10.1 v
Charging is 12.6 to 18v is ok
NOTE:01
1) This board is not suit high power electronic tools, if use for screwdriver and drill,electric bike series make,fishing machine , please don’t buy this.
Pcb Bms For Drill Motor 11.1V 12.6V Lipo Cell Module
BMS activate method : Use 12.6V Li-ion charger to charge it
Scope: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, polymer lithium battery)
Product Size: 42 * 60 * 3.4mm (balanced version)
Product weight: 9.8g (balanced version)
Charging voltage: 12.6V – 13.6V
Continuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current use)
Continuous charge current (upper limit): 20A
Balance version: suitable for starting current below 80A, power 135W below the drill.
Note 02
: try not to put a good battery and poor battery mixed together!
Note 03
When the load of the brush motor is used, try to connect a non-polar capacitor (withstand voltage above 25V, capacity 10uF-100uF) to the motor’s positive and negative terminals to prevent the reverse spike from the motor. Break the MOS tube.
Kingston DDR2-667 SDRAM KVR667D2S5/1G
DESCRIPTION
This document describes ValueRAM’s 128M x 64-bit 1GB
(1024MB) CL5 DDR2-667 SDRAM (Synchronous DRAM)
memory module. The components on this module include
eight 128M x 8-bit DDR2-667 SDRAM in FBGA packages.
This 200-pin SODIMM uses gold contact fingers and requires
+1.8V.
Earphone Headset with Mic for Mobile phone
Highly supported for oppo all brands vivo Xiaomi Sony Samsung Apple
3.5mm Earphone Headphone
Quality: AAAAA
Color: Black
Cable: about 1M
Volume control With Mic
Eneloop Pro AA High Capacity Ni-MH 2550mAh (Min. 2450mAh) Pre-Charged Rechargeable Battery
W1209 DC12V Digital Cool Heat temp Thermostat Thermometer Temperature Control -50-110C Switch
- Dimensions: 48 * 40mm
- Temperature control mode: ON / OFF
- Temperature range :50-110
- Output voltage: for DC 12V
- Output power: 10A relay
- Hysteresis accuracy: 0.1
- Refresh rate: 0.5S
- High temperature protection 0-110
- Supply voltage: for DC 12V
- Static current: ≤ 35MA, attract current ≤ 65MA
- Measurement input: NTC (10K 0.5%) Waterproof Sensor
- Environmental requirements: -10 ~ 60 Humidity 20% -85%
Import placeholder for 9482
DDR3 1333 pc3 10600 4Gb Ram Kingston
DC 300W 20A CC CV Constant Current Adjustable Step Down Converter Voltage Buck Current Source Module
Specifications:
Input Voltage: 6V to 40V DC(10V to 40V is suggested)
Output Voltage: 1.2V to 36V DC
Output Current: 20A(max.), 15A(suggested)
Efficiency: 95%(24V to 12V, 20A)
Output Ripple: ≤50mV
Wiring Method: Terminal
Short Circuit Protection: Self-recovery(cannot short circuit for long time)
Size: 60 x 53 x 27mm / 2.36 x 2.08 x 1.06″
VO+: Output positive
VO-: Output negative
+IN: Input positive
-IN: Input negative
CV: Output voltage adjustment
CC: Output current adjustment
EN: Enable, low voltage level shut off output; suspension, high voltage level is effective
When input and output is common grounded, no-load CV output constant voltage,CC output constant current