Showing 1–12 of 17 results

Show sidebar

3S 11.1V 25A w/Balance BMS Protection PCB Board

රු1000
Package Included: 1 x Battery Protection Board Matters need attention: 1. Strictly connect according to  wiring diagram : 0V(B-),  3.7V(B1), 

3S 40A 18650 Li-Ion Lithium Battery Charger Protection Board Pcb Bms 12.6V

රු1100
BMS voltage cut of   10.1 v Charging is 12.6 to 18v is ok NOTE:01 1) This board is not suit high power electronic tools, if use for screwdriver and drill,electric bike series make,fishing machine , please don't buy this. Pcb Bms For Drill Motor 11.1V 12.6V Lipo Cell Module BMS activate method : Use 12.6V Li-ion  charger to charge it Scope: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, polymer lithium battery) Product Size: 42 * 60 * 3.4mm (balanced version) Product weight: 9.8g (balanced version) Charging voltage: 12.6V - 13.6V Continuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current use) Continuous charge current (upper limit): 20A Balance version: suitable for starting current below 80A, power 135W below the drill. Note 02 : try not to put a good battery and poor battery mixed together! Note 03 When the load of the brush motor is used, try to connect a non-polar capacitor (withstand voltage above 25V, capacity 10uF-100uF) to the motor's positive and negative terminals to prevent the reverse spike from the motor. Break the MOS tube.

Battery Charger XTAR DRAGON VP4 PLUS Smart Set Pouch Probe Adapter Car Charger

රු35000

DRAGON VP4 Plus

XTAR DRAGON VP4 Plus, your personal battery doctor! 

• Test battery internal resistance and voltage

• Test battery real capacity

• Charge all popular Li-ion/Ni-MH batteries and 11.1V battery packs

• Optional 0.5A/1.0A/2.0A charge currents

• REFRESH Mode to eliminate memory effects

• USB output function

• Informative big LCD screen display

• Record function 

DC 300W 20A CC CV Constant Current Adjustable Step Down Converter Voltage Buck Current Source Module

රු4000
Specifications: Input Voltage: 6V to 40V DC(10V to 40V is suggested) Output Voltage: 1.2V to 36V DC Output Current: 20A(max.), 15A(suggested) Efficiency: 95%(24V to 12V, 20A) Output Ripple: ≤50mV Wiring Method: Terminal Short Circuit Protection: Self-recovery(cannot short circuit for long time) Size: 60 x 53 x 27mm / 2.36 x 2.08 x 1.06"   VO+: Output positive VO-: Output negative +IN: Input positive -IN: Input negative CV: Output voltage adjustment CC: Output current adjustment EN: Enable, low voltage level shut off output; suspension, high voltage level is effective When input and output is common grounded, no-load CV output constant voltage,CC output constant current  

DDR3 1333 pc3 10600 2Gb Ram Kingston

රු2200
used 2200LKR 1 month warranty Kingston  2Gb ram

DDR3 1333 pc3 10600 4Gb Ram Kingston

රු4000
used 4000LKR 1 month warranty Kingston  4Gb ram

Eneloop Pro AA High Capacity Ni-MH 2550mAh (Min. 2450mAh) Pre-Charged Rechargeable Battery

රු1500
This product is Brand New and super fresh Use in many electronic home devices This product is Manufactured in Japan

High Power Led light Rechargeable Torch Light

රු26000
Ultra fire High Power Led light Rechargeable Torch Light 6 month warranty Repairable Car Charging Vehicle Adapter  + 230AC charger

JK-BD6A20S10P

රු33000
Main technical parameters: JK-BD6A20S10P Working voltage: 20~100V Main Specifications Li-ion 7S~20S Lifepo4 8S-20S LTO 12S~20S Balance way Active Balance Active

Kingston DDR2-667 SDRAM KVR667D2S5/1G

රු1500
DESCRIPTION This document describes ValueRAM’s 128M x 64-bit 1GB (1024MB) CL5 DDR2-667 SDRAM (Synchronous DRAM) memory module. The components on this module include eight 128M x 8-bit DDR2-667 SDRAM in FBGA packages. This 200-pin SODIMM uses gold contact fingers and requires +1.8V.

Mini DC-DC 4.5V-35V 5A 90W PWM DC Motor Speed Controller Module Speed Regulator Control Adjust Adjustable Board Switch 12V 24V

රු750
Specification:
Working voltage: DC4.5V-35V
Output current: 0.5A
Output power: 90W (maximum)
PWM frequency: 20KHz
Product size: 30mmx26mmx14mm/1.18x1.02x0.55''
Product weight: 14g
 
Warm Tips:
1. DC positive and negative terminals do not reverse, otherwise the governor may be damaged.
2. The motor can be divided into positive and negative directions. When the direction of operation is not consistent with the expectation, the direction can be changed by adjusting the line order.
3. Adjusting the potential meter knob can change the duty cycle of the governor and change the speed of the motor.
 
Package Included:
1 x Mini 5A 90W PWM 4.5-35V DC-DC Motor Speed Controller Module Regulator Adjustable

Original Brand Earbuds Headphone Noise Isolating in ear Earphone Headset with Mic for Mobile phone Universal for MP4

රු2500
Highly supported for oppo all brands vivo Xiaomi Sony Samsung  Apple 3.5mm Earphone Headphone Quality: AAAAA Color: Black Cable: about 1M Volume control With Mic